104975 Motul ENGINE CLEAN AUTO Use Before Next Oil Change! (300ml, 10.1 fl.oz.)

Description

104975 Motul ENGINE CLEAN AUTO Use Before Next Oil Change! (300ml, 10.1 fl.oz.)
"Think Quantity, Buy Quantity, This item has volume price breaks!"
This listing is for a 300mL can of Motul Engine Clean.
MOTUL ENGINE CLEAN is to be added to your old oil just prior to an oil change (instructions are included) to cleanse the engine of build up and deposits of old oil.
MOTUL ENGINE CLEAN is designed to be used in all types of Diesel and gasoline engines, with or without catalytic converters, using all types of fuel.
MOTUL ENGINE CLEAN effectively cleans dirtying and clogging which appear in the engine. The removed microparticles are then evacuated at the time of the oil drain.
MOTUL ENGINE CLEAN provides a perfect lubrication during cleaning process.
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to :
· lower the wear
· decrease oil and fuel consumption
· increase compression on all cylinders
· decrease exhaust pollutants/emissions
· evacuate deposits, varnishes and other combustion residues from problem areas such as hydraulics lifters or piston grooves and rings
· take advantage of fresh oil which will fill engine after draining
· increase catalytic converter’s lifetime
Before each oil drain, add, in the engine, a can of ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the filter. The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per supplementary litre of engine oil (over 5 litres) . Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments. Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very appreciable reduction of pollutants emissions to pass Vehicle Inspection.
Colour Red
Density at 20°C NF T 60 101 0.824
Flash point NF T 60 118 40°C